ModularGrid Rack

Hiya,
(sorry in advance for the stupidly long post)

OK here’s the first rack this noob is planning out…
I know it’s WAY too big and expensive - but the idea was to pick out stuff that has caught my eye/ear and trim it down from there.
I’m hopefully looking to build a 6u 82hp case if I can afford it, ironically it is cheaper to get this Behringer 6u 140hp - I just won’t fill it.
But I will be breaking the cardinal rule of starting small - willing to spend maybe $5-7K AU in one go (big for me) because of tax stuff…

Rack will be used to integrate with existing hardware I have and my Interface/Ableton, but obviously would like to be able to perform with it standalone. (not that I will be gigging - but that’s the benchmark I’d like to set for usability).
For example - I have a Roland TR8S and other drum machines, but still want some drums in the rack.
Other hardware I’d like to expand/integrate using this rack are - DFAM, Neutron, MiniFreak, SQ-1, MC202, CS-15 (Hz/v) and Korg X911(hz/v).

Apart from expanding my hardware - my studio is very much lacking FX, both lush and harsh, so the other key use will be outboard effects from my DAW and of course sound design sessions to compose with in the DAW.

I have a Motu 828x - planning to use the ES-3, 6 and 7 to get 8in, 8out via ADAT. Went with this instead of the new ES-9, as I’d like to minimise using an aggregate sound card.

I’d LOVE to get your thoughts on where I might be overlapping (likelyFX) to help me trim down the rack (and price). And also anything missing/lacking - (likely utilities)

Modules I’m deadset 100% including are: Crush Delay and.… hmm that’s it actually 🙂
But I’m 95% keen on Pam, DistingEX, and Rings.
Other “Tasks” that need to be filled are - 1. A sample slicer (for easy chopped breaks not granular FX), 2. A tight beat synced delay, ideally where changing sub-divs doesn’t repitch, 3. Lush reverb/shimmer/grains, 4. Some creative seq like euclidain w probability and basic perc section.

Here’s some comments on my decision making in this rack:

Pam’s - seems she’s a great workhorse for trig seq and mod - I’m OK with some menu diving as long as it’s clearly labelled.
DistingEX - same as above - want the hz/v - v/oct converter and interested in multisample recorder and of course the many other use cases.
Sebsongs Odds - ? seemed like a cheap useful Rnd Seq.
Wrong Acronym - I just saw this at Superbooth and loved the thick distorted sounds coming out of it.
HN 3x MIA - useful attenuverters.
Joranalog Contour 1 - want a slew limiter and Divkid’s demo of this sold me.
After Later Beehive (Plaits) - seems every case needs one, but do I need it if I have my MicroFreak?
Rings - Want these nice tones to juxtapose all the subtractive synths I have.
Maths - Essential apparently, but it’s so big! Are there smaller alternatives - saw the Falistri, smaller - but bigger in price.
Wrong LRMSMSLR - Saw this at Superbooth and think it’s a great idea.
Monsoon (Clouds) - Another one that seems to be in every case…
QuBit Nautilus - Liked the demo from Qu-Bit, but I seem to have a lot of time-based effects going on…
QuBit Aurora - I really like this demo, could this replace Clouds? (is that blasphemy)
HN 6x Mix - this seemed to be the best solution for mixer channels vs hp I found. I may need to reduce to one unit, Was hoping I could somehow patch together a hacked Aux send.
WMD MSCL - this more moreso to fill a gap than me thinking I need a comp, but I guess a comp is a good idea?
ES ES-3 - Definitely keeping this - but are there issues running a long ribbon cable to connect to the ES-6 on the other side on the case? It makes sense to me like this.
Ornament and Crime - Honestly I don’t really know what this does :) seemed very interesting and useful, but a lot went over my head.
uGrids - added this because it seemed like a great way to instant get some beat going while exploring other parts of the rack.
3 drum modules - I do want some basic drums -and these seemed good.
Mutes and Comp - these are pretty much just fillers.
Joranalog Step 8 - This seemed really interesting - for it’s seq and mod and the cool polyphony voice management I saw in a youtube vid, but a) do I need it considering there’s Maths and Pam, b) if it is a good idea, would Stages be better? (slightly smaller).
Bitbox Micro - I want a sample slicer - originally had Erica Synths Sample Drum here, but then thought maybe I should get a stereo one.
Crush Delay - This crazy thing is staying.
Joranalog Filter 8 - figured I had to have at least one filter in my rack, probably lacking there, could use my existing hardware filters too. The Divkid demo of this was amazing.
4MS Dual Looping Delay - I want a delay just like this, but it’s SOO big! I think I can get away with mono - but I don’t know of a similar mono version.
QuBit Prism - Loved the demo of this, the filter and decimator makes it more versatile - could this and Aurora replace Clouds and Nautilus?
ES-6 & 7 - Want these.

I haven’t even begun to look at power usage and whether voltages ranges with all modules are compatible.
For now, Guess I’m just showing off my first rack creation :)


(sorry in advance for the stupidly long post)

not to worry...

OK here’s the first rack this noob is planning out…
I know it’s WAY too big and expensive - but the idea was to pick out stuff that has caught my eye/ear and trim it down from there.

it's a dream rack.. so a plan in progress... and as we know no plan survives contact with the enemy - the enemy in this case is...you!

I’m hopefully looking to build a 6u 82hp case if I can afford it, ironically it is cheaper to get this Behringer 6u 140hp - I just won’t fill it.

yes but is cheaper better? do you really want to give uli the money? maybe take a look at some of the reasons why you wouldn't want to... google them - they're easy to find

a better case is a mantis - best bang for buck of hp/cost/decent power/manufacturer reputation...

the b-company 140 hp case is a 'clone'-ish of the mantis - with no thought put into upgrading the power to compensate for the extra hp - so with the b-company version you may have power issues...

But I will be breaking the cardinal rule of starting small - willing to spend maybe $5-7K AU in one go (big for me) because of tax stuff…

the concept of starting small is not in relation to the size of the case - it's to do with the number of modules you start with - a bigger case is better so that you have space to expand into once you realize that the modules that you originally bought need more modules to support them to get the most out of them!

best advice - get a bigger case than you think you need (as you will need it & probably more down the line) and then just a few modules that comprise a minimum viable synth - a sound source, a modulation source, a sound modifier, a way to listten (a quad cascading vca will do to start with as a mono output) and a way to play it... possibly add some simple utility modules... and then once you have learnt those modules thoroughly - add 1 or 2 more and repeat - adding modules slowly - at most 1 or 2 per month

and read and spend time thinking about the contents of my signature... if you have questions - ask!

Rack will be used to integrate with existing hardware I have and my Interface/Ableton, but obviously would like to be able to perform with it standalone. (not that I will be gigging - but that’s the benchmark I’d like to set for usability).
For example - I have a Roland TR8S and other drum machines, but still want some drums in the rack.

percussion in modular is very expensive - I would leave this at least for now - especially as you already have external drum machines etc - I would initially concentrate on integrating what you have with the modular

Other hardware I’d like to expand/integrate using this rack are - DFAM, Neutron, MiniFreak, SQ-1, MC202, CS-15 (Hz/v) and Korg X911(hz/v).

see above

Apart from expanding my hardware - my studio is very much lacking FX, both lush and harsh, so the other key use will be outboard effects from my DAW and of course sound design sessions to compose with in the DAW.

the only reason for FX in modular is that they are cv modulatable, pedals and/or used 19" rack effects are often better value!

I have a Motu 828x - planning to use the ES-3, 6 and 7 to get 8in, 8out via ADAT. Went with this instead of the new ES-9, as I’d like to minimise using an aggregate sound card.

I would work out exactly what you need for dc-coupled i/o before committing... isn't the 828 dc-coupled? what DAW/cv control software are you intending to use?

I’d LOVE to get your thoughts on where I might be overlapping (likelyFX) to help me trim down the rack (and price). And also anything missing/lacking - (likely utilities)

Modules I’m deadset 100% including are: Crush Delay and.… hmm that’s it actually 🙂
But I’m 95% keen on Pam, DistingEX, and Rings.
Other “Tasks” that need to be filled are - 1. A sample slicer (for easy chopped breaks not granular FX), 2. A tight beat synced delay, ideally where changing sub-divs doesn’t repitch, 3. Lush reverb/shimmer/grains, 4. Some creative seq like euclidain w probability and basic perc section.

1/3 could be handled by clouds (or a clone) with the kammerl bet repeat firmware installed - but not at the same time - also includes a delay which is quite good

4 can be handled by pams

Here’s some comments on my decision making in this rack:

Pam’s - seems she’s a great workhorse for trig seq and mod - I’m OK with some menu diving as long as it’s clearly labelled.
DistingEX - same as above - want the hz/v - v/oct converter and interested in multisample recorder and of course the many other use cases.

nb disting ex - only 1 or 2 algos at the same time!!!

Sebsongs Odds - ? seemed like a cheap useful Rnd Seq.
Wrong Acronym - I just saw this at Superbooth and loved the thick distorted sounds coming out of it.
HN 3x MIA - useful attenuverters.

not only attenuverters, but offsets - very useful!

Joranalog Contour 1 - want a slew limiter and Divkid’s demo of this sold me.

also covered by maths!

After Later Beehive (Plaits) - seems every case needs one, but do I need it if I have my MicroFreak?

microfreak will output line level, have you included anything for boosting this to modular levels? can you control it with v/oct? does it have the new modes? wouldn't you be better off with a full size clone (eurorack is small enough already - 1hp = 5.08mm or 1/5" - really small - a lot of people are shocked by how small at first - trimmers are tiny and not very precise

Rings - Want these nice tones to juxtapose all the subtractive synths I have.

brilliant module - also excellent as a processor, not just a sound source

Maths - Essential apparently, but it’s so big! Are there smaller alternatives - saw the Falistri, smaller - but bigger in price.

it's not that big - it's smaller than a lot of guitar pedals - ergonomics are really important in having a good experience with your synthesizer... did I mention how s,all eurorack actually is? & did you actually comprehend how small it is - 1hp = 1/5", 1u = 1.75" - modules are small - modules that are overly cramped are a nightmare - maths has reasonable ergonomics!!!

& not essential - but it is very, very useful - especially as it has the most documentation of any similar module - see the 'maths illustrated manual' - download it - once you actually have maths repeat working your way through it until you are sick - and then continue - concentrate on how, why, what maths is doing...

falistri - yes it's a possible replacement for maths - but imo, the ergonomics and user interface are worse by an order of magnitude!!

Wrong LRMSMSLR - Saw this at Superbooth and think it’s a great idea.
Monsoon (Clouds) - Another one that seems to be in every case…

again you may be better off with a full size clone... better ergonomics etc

QuBit Nautilus - Liked the demo from Qu-Bit, but I seem to have a lot of time-based effects going on…
QuBit Aurora - I really like this demo, could this replace Clouds? (is that blasphemy)

clouds can be a spectral processor - it's one of the additional modes and it can be used as a reverb, although it's not it's core functionality - no such thing as blasphemy!!

HN 6x Mix - this seemed to be the best solution for mixer channels vs hp I found. I may need to reduce to one unit, Was hoping I could somehow patch together a hacked Aux send.
WMD MSCL - this more moreso to fill a gap than me thinking I need a comp, but I guess a comp is a good idea?

not unless you need one - filling hp for no reason is not a good idea - unless you want case buying to be a hobby!

ES ES-3 - Definitely keeping this - but are there issues running a long ribbon cable to connect to the ES-6 on the other side on the case? It makes sense to me like this.

you could just put the es6 next to the es3...

Ornament and Crime - Honestly I don’t really know what this does :) seemed very interesting and useful, but a lot went over my head.

then don't buy it!!! at least until you have done more research and understand not only what it does but also why it's the right module for you... same goes for every other module too!!!

uGrids - added this because it seemed like a great way to instant get some beat going while exploring other parts of the rack.
3 drum modules - I do want some basic drums -and these seemed good.

if you already have a drum machine then these should be really low priority!

Mutes and Comp - these are pretty much just fillers.

blank panels are better fillers than random modules!!! they are cheaper and just as useful

Joranalog Step 8 - This seemed really interesting - for it’s seq and mod and the cool polyphony voice management I saw in a youtube vid, but a) do I need it considering there’s Maths and Pam, b) if it is a good idea, would Stages be better? (slightly smaller).

there is no module that you need... buying a module just because it is slightly smaller than something else is not a good idea - do more research!!!

Bitbox Micro - I want a sample slicer - originally had Erica Synths Sample Drum here, but then thought maybe I should get a stereo one.

if you go stereo you will also need to improve the end of chain mixing - so that it can accommodate both mono and stereo

Crush Delay - This crazy thing is staying.
Joranalog Filter 8 - figured I had to have at least one filter in my rack, probably lacking there, could use my existing hardware filters too. The Divkid demo of this was amazing.

I'd go with more filters than sound sources...

4MS Dual Looping Delay - I want a delay just like this, but it’s SOO big! I think I can get away with mono - but I don’t know of a similar mono version.

isn't the new 4ms delay 1/2 a DLD? so big is relative - it's 4" across or something!!! actually tiny!

QuBit Prism - Loved the demo of this, the filter and decimator makes it more versatile - could this and Aurora replace Clouds and Nautilus?
ES-6 & 7 - Want these.

I haven’t even begun to look at power usage and whether voltages ranges with all modules are compatible.
For now, Guess I’m just showing off my first rack creation :)

you are over power on the +12v - you need to leave at least 25% headroom or you will almost definitely have problems - particularly with so many digital modules - inrush power consumption is often much higher than stated and stated figures are not necessarily accurate

as for voltage ranges - they are all compatible with the addition of attenuversion and offset - utilities are essential modules and in general much better additions to the average case than another oscillator or lfo or effect (& often less expensive and power hungry)

additional - you will almost definitely want VCAs - lots of them - I've suggested a quad cascading one above, but really in this size case I'd want at least 2 of those 1 for audio and 1 for modulation (so at least one needs to be dc-coupled) which will probably mean you may want more envelope generators...

the cascading part of the "quad cascading vca" means that it can also double as a mixer - I would also want more mixing in a case this size - not only end of chain mixing - which appears to be poorly thought out, but also sub-mixing so that you can combine signals before further processing and as always a matrix mixer is a very good proposition - especially for combining modulation sources to create more complex ones...

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


Thanks very much for all the advice! and sorry for the slow reply.

So, I have gone through many changes of approaches and iterations just in the last week.
I’ve made the case smaller - mainly just help me reduce the amount of modules, I think this size is better - looking at my “local” store, I’m leaning towards the Erica Synths 2x104HP Aluminium Travel Case With Lid
Not that I need it for gigging but seems to be good for price, power and availability (Can’t see th Mantis cases available anywhere in Australia yet)

I got rid of the idea of sample/beat slicing in the case, along with drums - like you said - also most of the osc/filters I have can be pingable for synth perc.

I may be a bit confused with the difference between VCAs and attenuverters, if both have CV inputs, aren’t they the same - only attenutervers are bipolar?
Yes, you’re right the motu does have DC-Coupled outs, perhaps I could get away with ditching the ES-3. However, I’m also thinking about send audio through these outputs, would I need dedicated modules to boost the motu outputs to modular level? If so, it may end up costing the same as the ES-3.

To be honest, I wasn’t thinking about CV at all but moreso processing audio from Ableton through the case. And processing outboard gear via Motu to the case…
Maybe I should instead add another 2xSAM - these can apparently be configured to be a line-modular boost via jumpers on the back.

I looked at clouds and kammerl beat repeat, however it is still not really what I want, but anyway - I decided to do this in Ableton.

ModularGrid Rack

So, this is my updated case, not sure if you can see the modules to the side, but my most recent omissions are the 100 Grit, swapped for the Steady State Gate, removed Worng Acronym (I really wanted this but can’t justify the price for an OSC), and took out the FX Aid, in the hope that Monsoon (Clouds) can cover reverb duties, and any time based FX not covered by Clouds, Prism or Crush Delay I could hopefully get out of Disting EX.

However - I think something/s else needs to go.

Wondering people’s opinions of what is more valuable out of Pachinko (Marbles) and Pam’s Pro workout, and also if you think I need the 0chd?
Seems like I have a lot of LFO modulation?
I’m leaning towards keeping Pam - but only because marbles was a late addition. But they’re hard to compare since Pam seems like an arranger and Marbles is more performable.
Or should I get rid of all three?! :)
Considering that - I have outside gear that can seq trigs/CV, albeit limited with minimal Euclid/random functions - such as: Keystep Pro, MicroFreak, DFAM, Neutron via midi input and a soon to be modded Roland MC202 with new Tubbutec seq, even the Roland TR8S can switch it’s individual outs to trigs.

Also, what specific utilities you would add to this?

I guess I need a mult, mutes/a-b switch? Anything else? Maybe a S&H?

Also - I’ve got the 3xMIA there to double as extra VCAs/mixer - can these also be used to reduce voltage down to line level? - for example plugging into an external sampler/looper
EDIT - OK, as I was typing that I realised the answer is likely no.
So - yes, like the 2xSAM for line input - I think I want at least one stereo line out in addition to the ES-6 interface to the motu/computer.


Can’t see th Mantis cases available anywhere in Australia yet)

they tend to go in and out of stock quite a bit - like everything in eurorack they're made in batches and when they sell out it can be a while before another batch gets built and shipped

I may be a bit confused with the difference between VCAs and attenuverters, if both have CV inputs, aren’t they the same - only attenutervers are bipolar?

VCAs are generally known as voltage controlled amplifiers, although a majority have a maximum amplification of 1 and are more correctly voltage controlled attenuators (which isn't necessarily a bad thing - as often that's all that is needed)

unless a specific attenuverter is described as voltage controlled, it won't be.. it'll be manual - the MIAs and the SAM are both manual

the (now discontinued) mutable blinds is an example of a VC Attenuverter... doepfer also make 1 - they are better used for modulation than for audio as they have a tendency not to close fully

Yes, you’re right the motu does have DC-Coupled outs, perhaps I could get away with ditching the ES-3. However, I’m also thinking about send audio through these outputs, would I need dedicated modules to boost the motu outputs to modular level? If so, it may end up costing the same as the ES-3.

which is why I was suggesting a mutable veils clone... as they have 20dB+ gain on each channel

To be honest, I wasn’t thinking about CV at all but moreso processing audio from Ableton through the case. And processing outboard gear via Motu to the case…
Maybe I should instead add another 2xSAM - these can apparently be configured to be a line-modular boost via jumpers on the back.

if that's the case then not a bad idea

So, this is my updated case, not sure if you can see the modules to the side, but my most recent omissions are the 100 Grit, swapped for the Steady State Gate, removed Worng Acronym (I really wanted this but can’t justify the price for an OSC), and took out the FX Aid, in the hope that Monsoon (Clouds) can cover reverb duties, and any time based FX not covered by Clouds, Prism or Crush Delay I could hopefully get out of Disting EX.

However - I think something/s else needs to go.

I would just buy less to start with - a sound source, a modulation source (I'd go for Maths - but don't expect to find a Black & Gold one - they're only available as part of the shared system - and if they do turn up for sale used they often cost double a normal maths), a sound modifier, you've already got a way to play in the keystep pro etc, a quad cascading vca - which can be used as a mono output for now and a few utilities - a simple dc-coupled mixer, a mult, a 3*MIA or similar and then add modules when you've learnt those modules inside out and as you find you need things...

Wondering people’s opinions of what is more valuable out of Pachinko (Marbles) and Pam’s Pro workout, and also if you think I need the 0chd?

both are useful... I have both a PNW and Marbles - never used PNW for looping random quantised pitch though - as I have Marbles for that...

Seems like I have a lot of LFO modulation?

not really - just count up the number of modulation inputs on the other modules...

Considering that - I have outside gear that can seq trigs/CV, albeit limited with minimal Euclid/random functions - such as: Keystep Pro, MicroFreak, DFAM, Neutron via midi input and a soon to be modded Roland MC202 with new Tubbutec seq, even the Roland TR8S can switch it’s individual outs to trigs.

all more or less useful - depending on your workflow...

Also, what specific utilities you would add to this?

I guess I need a mult, mutes/a-b switch? Anything else? Maybe a S&H?

mult probably - a passive (or stackcables or headphone splitters) to start - a buffered one if you need it - I find Maths benefits from a buffer when connecting it's outs to some modules

mutes - not necessarily, unless you feel you need them...

a-b switch - I've always liked sequential switches myself - doepfer does a decent inexpensive bi-directional one

Also - I’ve got the 3xMIA there to double as extra VCAs/mixer - can these also be used to reduce voltage down to line level? - for example plugging into an external sampler/looper
EDIT - OK, as I was typing that I realised the answer is likely no.

kind of but probably not very precise - 3*MIA isn't a VCA though - no VC!

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


Thanks! I missed your mention of Veils, but this is great. I decided to ditch the ES digital ins/outs for now.
I've got a single input module for line or Guitar w bonus env and gate and veils as back up for extra line inputs and VCA duties.
Got rid of Pam, as the outboard gear I have can seq absolute trigs/CV and the Pachenko/Marbles will add a lot of happy "accidents". Because of that I also removed the 0ch LFOs and the Instru logic, I kind of wanted the logic but it was quite expensive and the Disting has one, albeit not as good.
An extra cascading attenuverter/mult/mixer, and having another cascading VCA on hand to also hopefully attenuate signals to line level if I want some more indvidual outs other than the two stereo line outs.

Now just trying to decide if I should swap the HN 3xMIA for a Doepher A138sv in case I want some panning, though it's not VC...

ModularGrid Rack


Thanks! I missed your mention of Veils, but this is great. I decided to ditch the ES digital ins/outs for now.

NP

I've got a single input module for line or Guitar w bonus env and gate and veils as back up for extra line inputs and VCA duties.

"extra vca duties" are almost always needed... & not just for audio!!!

Got rid of Pam, as the outboard gear I have can seq absolute trigs/CV and the Pachenko/Marbles will add a lot of happy "accidents". Because of that I also removed the 0ch LFOs and the Instru logic, I kind of wanted the logic but it was quite expensive and the Disting has one, albeit not as good.

you'd be surprised - often the algos on disting are really quite good... especially when you take into account the actual cost of the disting algo compared to an instruo module

An extra cascading attenuverter/mult/mixer, and having another cascading VCA on hand to also hopefully attenuate signals to line level if I want some more indvidual outs other than the two stereo line outs.

Now just trying to decide if I should swap the HN 3xMIA for a Doepher A138sv in case I want some panning, though it's not VC...

neither is the 3MIA... but I'd keep the 3MIA and work out how to patch auto-panning with an LFO, an inverted and offset copy of the LFO and veils...

"some of the best base-level info to remember can be found in Jim's sigfile" @Lugia

Utility modules are the dull polish that makes the shiny modules actually shine!!!

sound sources < sound modifiers < modulation sources < utilities


Got rid of Pam, as the outboard gear I have can seq absolute trigs/CV and the Pachenko/Marbles will add a lot of happy "accidents". Because of that I also removed the 0ch LFOs and the Instru logic, I kind of wanted the logic but it was quite expensive and the Disting has one, albeit not as good.
-- pechnatunk

It is worth considering keeping a Pam's Pro Workout in the system. It's incredibly useful for so many things, and often saves me having to buy new modules for certain jobs as I realize that Pam's has it covered. As I write this, it's being used to keep the whole system in time, as well as modulating various things. And I've just been reading up on using it for some euclidean experimentation. I in fact have two in my rack, and both are always doing something. For the price and the size, it's crazy how useful it is.

One other thing, which is probably fairly obvious: you will in all likelihood change your system on an ongoing basis. It's the joy of modular. The way you make music will develop, and your knowledge will make fun new things possible. If it really gets hold of you, controlling your spending may be a challenge. Dealing with GAS is a part of the journey for most people. But as long as you are reading manuals and getting the most out of what you have, GAS may be ameliorated to some degree. In six years I've gone through over 100 modules, and bought several of them twice.

I hope this is useful to some degree, and I wish you well with it.


Got rid of Pam, as the outboard gear I have can seq absolute trigs/CV and the Pachenko/Marbles will add a lot of happy "accidents". Because of that I also removed the 0ch LFOs and the Instru logic, I kind of wanted the logic but it was quite expensive and the Disting has one, albeit not as good.
-- pechnatunk

It is worth considering keeping a Pam's Pro Workout in the system. It's incredibly useful for so many things, and often saves me having to buy new modules for certain jobs as I realize that Pam's has it covered. As I write this, it's being used to keep the whole system in time, as well as modulating various things. And I've just been reading up on using it for some euclidean experimentation. I in fact have two in my rack, and both are always doing something. For the price and the size, it's crazy how useful it is.

One other thing, which is probably fairly obvious: you will in all likelihood change your system on an ongoing basis. It's the joy of modular. The way you make music will develop, and your knowledge will make fun new things possible. If it really gets hold of you, controlling your spending may be a challenge. Dealing with GAS is a part of the journey for most people. But as long as you are reading manuals and getting the most out of what you have, GAS may be ameliorated to some degree. In six years I've gone through over 100 modules, and bought several of them twice.

I hope this is useful to some degree, and I wish you well with it.
-- gumbo23

Ha - I know! it is a very tough decision to remove Pamela (it's my girlfriend's name too! )
And now I'm having second thoughts, no thanks to you :)
Just read the manual and learnt about the logic and crossmod modes built in - which are very interesting indeed - and also the triggered rotating output.

As for GAS - yes, this purchase will also coincide with me selling some lesser used items - unfortunately they aren't worth as much... :)


Beautiful, brilliant, go for it! Modules you have here that I use all the time and highly recommend: Pamela's Pro Workout, Disting EX, 3x MIA, Plaits clone, Rings clone, Maths, Clouds clone, O&C--excellent choices, all! I am not familiar with your other modules, but that is not a down-vote for them. I started out with a system smaller than this, and after 2-3 years had a system bigger than this. Any size modular synth is a blast. Enjoy it! I make mostly ambient music and organic noise.

Trim down this rack? I wouldn't. I would like to hear it!


Zeta_fxn - how do you define 'organic noise'? Do you have any examples online?


A general definition may also suffice.

'On ne devrait jamais quitter Montauban' (Fernand Naudin).
https://soundcloud.com/petrus-major/tracks