Some feature is missing? Post your idea.
Beep, Bopp, Bleep: [email protected]
The ModularGrid Forum uses Markdown for formatting purposes.
It's like HTML but feels more natural to write because in general you don't need closing tags.
Additionally you can read Markdown even if it's not formatted.
Below the Markdown Editor Form is an inline link Markdown Syntax which lists most of the useful formatter options.
A hashtag before a text block creates a heading
#This is heading 1
Two hashtags before a text block create a heading in hierachy 2
##This is heading 2
*Yeay*. This results is Yeay.**Yeay**. This results in YeayJust prefix * or numbers 1.to a textline and create numbered or bullet lists.
will do
Just post the link of your Rack in the Editor. The Rack will be embedded end linked.
Same functionality applies to Soundcloud, YouTube and Vimeo media.
Just post the URL from the browsers address bar in the editor!
Beep, Bopp, Bleep: [email protected]
The Forum is about modular synthesizers.
Don´t flame, don't shout, be nice.
Don't hi-jack threads, don't cross-post.
Don´t embed porn or violent media of any kind.
This is not the place for discussions about politics or society.
No blunt racism
Use the marketplace for that
Moderators are always right
Beep, Bopp, Bleep: [email protected]
Sketch a Patch is very basic idea to quickly write down a patch you have created to use it later or share it with other users.
To start with a sketch you first have to build a rack with your modules in the planner. After you have added all relevant modules open the Sketch a Patch Drop Down Menu in the secondary navigation of the planner and click on New Patch.
A screenshot of your rack will be generated and you will be redirected to the Sketch a Patch editor.
Now you simply can double click anywhere on the screenshot to create a new cable.
Drag and Drop the jacks of the cable to the desired positions (that's probably over the socket of a module).
Jacks will NOT snap to sockets, Sketch a Patch is really just a kind of a freehand drawing board.
Double Click on a cable to remove it from the sketch.
Don't forget to save your sketch! (Click on Save Patch)
To mark knob positions switch to Knob Marker Mode via the top left button menu.
If you double click on your sketch a white circle appears you can use to mark knob positions or enabled buttons or anything else you want to point out.
You can freely move the marker via Drag and Drop.
Double click a marker to remove it.
You can select two available Color Systems for your cables
On Eurorack modulars the color of the patch cable will change in relation to the length of the cable depending on the chosen cable system.
Just for fun. Try it out.
You can save your Patch Options settings
If you have added or removed a new module to your rack you have to generate a new screenshot for Sketch a Patch in the planner. Else you will always see the old rack screenshot.
To create a new screenshot click on Show->Screenshot in the planner. After that got to the Sketch a Patch Editor and if you still see the old screenshot hit the browser refresh button hard (while holding SHIFT).
Be aware that if you move a lot of modules your older sketches will be all over the place.
Beep, Bopp, Bleep: [email protected]
TrueGrid is an experimental modular web synthesizer which let's you create, listen and share modular synth patches.
TrueGrid works like a real modular synth in a way that you have to wire up different modules to generate useful or not so useful sounds.
It needs some experience to get something predictable out of this synth, but thats where the whole fun starts: Discover what is possible
Create a new empty rack and name it "My awesome Truegrid Synth". More creative naming options will work, too.
With the search function of the module browser you can enable a checkbox Playable in TrueGrid.
This lists all available playable modules for TrueGrid.
Add some modules to your rack. As a start you should add an Oscillator, VCA, LFO and VCF to create basic subtractive building blocks.
If you have found a cool TrueGrid Patch from an other user you can copy the Patch and alter it as you please. Just click Save as a new Patch in TrueGrids secondary navigation.
Sockets of the modules are color coded.
To connect two sockets:
Drag a cable from an output to an input till the cable snaps.
To disconnect:
Drag the cable away from one socket or simply double click on the cable.
To turn the knobs, hover over a knob, click and hold the mouse and do a vertical movement.
ProTip: if you hover over a jack the corresponding jack on the other side of the cable will light up.
No, they are not. The modules are carefully modeled after their originals but since all coding is done in JavaScript they can not achieve the sound of their originals. Sorry, you still have to buy the real ones.
The intention is that you can experiment with the settings of a module and get somewhat familiar with the interface.
This is even more experimental. You can play TrueGrid via MIDI!
To make this work you have to take care that your MIDI interface is connected and switched on before you start your browser.
More detailed information can be found here.
You need a reasonable fast computer and as of today TrueGrid works best in Chrome.
Safari should also work, and since more and more Browsers implement the required WebAudio API it should be widely supported in near future.
Beep, Bopp, Bleep: [email protected]
Using the planner should be self-explanatory. Just some things to point out which might be not obvious:
You can use keyboard shortcuts to edit your rack.
First you have to hover with your mouse over a module until the info icon appears.
This activates Module Select Mode.
In Module Move Mode:
The power consumption per rack is calculated by the values users add to the module data.
Those ratings are error prone. Don't rely exclusively on the values when choosing your power supply! Always check manufactures specs from the manuals.
You can disable the display of your accumulated rack prices in the user settings.
If you can not edit modules or reply to discussions or threads in this forum you most likely missed to click on the link on the confirmation email you received when you registered to MG. Probably this email is hiding somewhere in your spam folder.
You can request this confirmation email again in your user settings.
See above
Beep, Bopp, Bleep: [email protected]
It's kind of context sensitive, so if you are on the Thread Index Page of a specific Forum the search will only return results from that Forum. If you want to search all Forums go to the Forums index page first.
The entries in the search fields are preserved. If you enter a search term and you click through the forums you will always see only threads which include the search term on the index page until you reset the search field.
The Forum uses Markdown Syntax to format text. This keeps the Database very lightweight and allows semantic representation of text.
A link Markdown Syntax below the Editor explains the most common used syntax.
If you don't care about it, just ignore and start typing right away.
Before you submit your post click the Preview button below the Markdown Editor and it will render your post inline.
No, you can always delete your last post if there is no reply to it.
Regardless where you are in the world, publication times of postings should adapt to your current timezone. No manual settings necessary. Daylight Saving settings might not work though.
You can embed Media like
by simply pasting their URLs into the form.
No need to fiddle with sharing options, no embed code necessary.
The exception are album embeds from Bandcamp. You have to copy the Wordpress.com code from the Bandcamp share options and paste that in the form.
Click on the Quote Button to quote an author, you don't have to mess with any HTML or proprietary Markup code. Those missing closing tags should be a thing of the past.
You can also quote multiple authors at once if their posts are on the same page! Just click and click and click on those Quote buttons.
To highlight a user prepend an @ to the username. A link to the users profile page will be generated.
Like in @solitud.
Upload your Avatar in your general ModularGrid user settings. No animated gifs, sorry.
If you do not upload an Avatar your Avatar from Gravatar will be used.
If you do not have an Avatar at Gravatar a unique Retro Image will be used.
Also in the general ModularGrid user settings. Links will be parsed, no Media Embed like Soundcloud is allowed in the Signature.
Beep, Bopp, Bleep: [email protected]