Caution, this module is not 24hp it is 28hp


I'm so sorry, for some reason it doesn't pick up the two modules (Hats, CP3). I'm going to try to send a patch image next


ModularGrid Rack

Setting the stereo mixer and zeroscope aside for the moment. I went back through you notes where you mentioned a CP3. I didn't know what that was which may be the reason I forgot about it. Now it starts to make sense. I pulled Plaits and put back in the Hats module and the Manhattan Analogue CP3.

Is this more in the direction of your guidance?

Dan


I've done some more work. Let's see if I can summarize it.

Removed Synthrotek VCO and Hat, replaced with KNIT a 4 hp clone of Plaits which I love; has nice percussive timbres as well as other ambient sounds (it goes where the open spot is, I have tried pasting the url twice and each time this module is missing...some kind of glitch I imagine. Use Peaks for Kick and Snare, or for it's LFO or Env as I wish.

I removed zeroscope (will use ES-9) replaced with a stereo mixer. Can I use Mosaic as a sub-mixer for drums processing? I don't know if it's buffered, and don't know if it needs to be. Thoughts?

I removed Rosie :( She can go in my next case :), added a dvca with lin/exp ability and moved it next to my Quad linear VCA.

I removed Synthrotek ADSR and replaced with Zadar (I think this is an amazing EG).

I removed QPAS and added Filter 8 by Joranalogue (more ladder filters but great sound), and added a gutsy SVF by Zlob.

As always, I look forward to your feedback.

All the best, Dan


ModularGrid Rack


ModularGrid Rack


Jim:
sorry here is the URL: ModularGrid Rack


Okay, I'm learning a lot.
Here is another attempt:
1. removed the Synthrotek VCO and ADSR
2. Added Filter 8
3. Added Zadar
4. Added another 2 channel VCA with linear and exp. (it's in an odd place on the second row near the ES-9 but it's the only place I could go, unless I placed it nearer the "drum" module and consider use it mostly for drum voices.
Thoughts?
Am I triangulating on this or spinning into the galaxy?
Dan


I've been working my way through your comments.
Sorry, I meant Wasp for a filter. I think you suggested I try to maintain 3 filters, so to replace the 18hp Qpas I could put the Wasp and Polaris by Intellijel (looks pretty good). If I needed to save 2 hp I could go with Ripples 8hp and wasp 8hp for a total of 16 hp; saving 2 hp for another envelope.

So here is where I'm confused. You asked if I needed another ADSR (Synthrotek) but believed you would add another envelope. I thought ADSR was an envelope. Could you explain further? What am I looking for?
Dan


Hi Jim:

Perhaps a little background would be in order:
I have been playing synth modelers and samplers most of my life. Last fall I though I would try a semi-modular rig. I bought the "O" suite from Make Noise. So organic I fell in love.

Later, I was about to donate a beautiful humidor as I quit smoking cigars, when I thought I would repurpose it into a synth. I was interested in ambient sounds so the rig has: Plaits, Rings, Marbles, SBG and Disting MK4.

Ah but then I was minding my own business when an incredible deal on a partially outfitted eurorack became available on Reverb. I snapped it up. The case was a basic raw pine 6U 104hp with power and: STO, Evolution, Elements, Octone, Clouds, and Sputnik.

Next I found an amazing military ammo bunker from WWI which I am repurposing into a 7U 104hp case. This is the project you are now witnessing. Since then, recently, I have purchased: ES-9, Doepfer VCA, DixieII, O_c, Peaks, Pams, and Cockpit.

I have Beatstep Pro (4 voice cv/gate/mod) sequencer, Erica Synths Bassline desktop (with LFO, Filter, Envelop and VCA), TR-8s. Plus loads of guitars, keyboards, and Ableton Push which I run through Ableton Live; and several acoustic string and wind instruments.

I am struggling with what I want this project to be and you are seeing that playout. I love ambient but afraid I may get bored. I love generative sounds. But ultimately would like to be able to coordinate everything for melodies and harmonies backing vocals. Also, I'd like to be able to just create Eurorack music as a standalone project.

I'm trying to keep the ES-9 in mind but it is tough. As you know I jettisoned the sampler in favor of Pam/Peaks/Hat modules. Ableton has an amazing sampler that I can use. I needed to sub-mix my VCO voices which is why I went with Cockpit plus it has side chain compression (although now I realize I could have used DAW/ES-9).

Anyway, I can return the Synthrotek models. I purchased them as DIY projects but are not opened and the sales manager has been wonderful to work with there. I like the QPAS mostly because I like Make Noise, and I wanted something different. But maybe I can fit a couple more VCAs (wasp?) in this space.

I'll take another shot at this and see what you think.

I don't know how you became the sherpa for novice patchers like myself, but God bless you. You are just what I need. Thanks again for taking all the time to review and comment in a meaningful way on this layout.

All the best,
Dan


I wrote a really long reply, but when I was to submit I had been kicked off. UGH
I work on it again a little latter.
Thank you so much for your help
(I'll try the little "keep me logged in" button and see if it works)


how do I post a link to it? Where do I find the link and then how do I post it.

I already own Clouds, and just purchased a used Peaks today for a good price.

Thanks again for taking the time to look it over.

Dan


Your continued comments are greatly appreciated.


Thanks Jim,
I'll do my homework in implementing your formula.


I'm fairly new at this. I own several of these modules but plan to pick up the rest. I use a drum machine Roland TR-8s; so I haven't explored that on a modular basis; but have another case in the ready for drums and sequencers.

I also have Erica Synths DB-01 as a desktop sequenced baseline, and have the o-coast/strega/o-control on my desk as well.
I use Ableton Live, thus the ES-09. I have the Keystep Pro Midi sequencer/controller with Midi/CV connectivity.

I converted a beautiful burl oak humidor and has Mutable Instruments: Marbles, Plaits, and Rings plus the Disting MK4.
I'm into ambient and otherworldly sounds. Not into Techno just yet.
Thank you in advance for your feedback.