Yup, I do have more or less an idea of what I want :)
I have actually seen Surgeon live once haha! Very nice indeed
Thanks for all the help anyway, it's likely that I'll build my own eurorack case to save some $$$
Might pick your brain when it comes to it...... Cheers!
Since I already own a minilogue I think I'd just be going for one sound from the modular, perhaps later on two.
If I get a semi-modular synth the sound will start there and once I have enough money to get a second sound source (with VCO/VCA/envelope generator etc etc) I will have two sounds..
Anyway my beatstep has 3 sequencers, two for synths (1x minilogue, 1x modular) and one for drums. I would be using my MFB Tanzbär for drums and perhaps my volca beats. So yea really what I'm looking for from my modular synth is something that can function as a pad ór arp ór a bass, but not simultaneously. I can make either sounds from the minilogue aswell and atm I'm still running from Ableton Live so I could always use soft synths or samples for additional sounds.
Since I already own a minilogue I think I'd just be going for one sound from the modular, perhaps later on two.
If I get a semi-modular synth the sound will start there and once I have enough money to get a second sound source (with VCO/VCA/envelope generator etc etc) I will have two sounds..
Anyway my beatstep has 3 sequencers, two for synths (1x minilogue, 1x modular) and one for drums. I would be using my MFB Tanzbär for drums and perhaps my volca beats. So yea really what I'm looking for from my modular synth is something that can function as a pad ór arp ór a bass, but not simultaneously. I can make either sounds from the minilogue aswell and atm I'm still running from Ableton Live so I could always use soft synths or samples for additional sounds.
I do realize I might need a bunch more clock-kind-of-modules, although I can send clock, cv and gates from both my beatstep and my tanzbar, so it should be possible to get the "arp" running with little to no extra modules. I already found out that multipliers and dividers aren't always actually that expensive, so that may not be the hardest thing to acquire. In any case, can always extend later :p Don't have to be working right from the start haha
Also drums coming from a modular synth usually don't sound that impressive to me, so I'm happy to do most of the drum sounds from my drum machines... Only thing that I think about all the time is the sidechain compressor haha, making that digitally is super easy, but howwwwwwwww would you make that in a modular setup ?!!
Make Noise make really really good stuff, I think im going to have a separate skiff case filled purely with make noise utilities in the future (If main case does not fit).
You will definitely want a Maths, theres no reason not to have one in a modular system.Making a case isn't too hard, all you have to do is make the side panels, a base plate panel (if needed), a back plate panel (if needed), Rails and a power supply.
For custom cases just buy everything from synthracks.com, they sell sets of rails secured in brackets so its really easy to line stuff up and drill holes etc.
https://synthracks.com/shop/eurorack-frameThen for PSU just use either:
(1) TipTop Audio uZeus module with break out cable and a Power Brick. (You can use however many uZeus you need, can have one in each row of your case etc.)
(2) TipTop Audio Dual Access module and some TipTop Audio Studio Bus Boards and a Power Brick.The second option delivers more power and allows for 6x Studio Bus boards to be connected to 1x TipTop Audio Dual Access module, the Studio Bus boards have 14 connectors compared to the breakout cables 10 connectors just another thing to consider.
You don't need to be super techy, you just need a clear idea of what you want to achieve in the end, theres no 2 ways about it you will be spending alot of money lol.
-- spaceV2
Yea I understand it's gonna cost a bit haha.
I read before aswell that the Dual Access is the better option in case you fill your rack with some energy-consuming modules, or in case you want to extend later.. I guess that's the better option?
I'm definitely getting Math and I think it makes sense to get Cloud..
I didn't really specify before what I wanted to achieve but basically what I love about the specific sound of modular synths is that somehow... the arpeggiated sounds and slow evolving melodies really sound very gooooood through other people's systems. I think it makes sense to get a good type of chorus/reverb/tape echo/delay, but then I'm not sure if I want that from within the modular system or as separate pedals... Probably a combination of the two would be most interesting.
In any case I want to use the rack on the stage. So it must be possible to use it in a useful way, without having to patch for 20 minutes. I understand that part of it will be mastering the synth and trying to remember some patch routes that work, but basically I would be running arpeggiators or sequences from my beatstep pro (BSP) and then use the modular rack as a lead synth or some sort of atmospheric pad thing if I add more reverb and sustain.
I'm sure you all know Colin Benders: he's on top of his game.....!
But yea something like these sounds (at 49min)
would be what I'm looking to get from my system in the endgame situation. Obviously it won't start like that, and I'm not looking to make the bass, pad and lead all from the modular setup, but this arp sound .. it just sounds so right!!
Cheers,
Precursor
Yes, its all about what you are wanting to achieve in the end and how you want to go about it.
A Prophet Desktop would be sick, but the sonic capabilities would be limited compared to eurorack. Id even go so far to say the Make Noise 0 Coast would give the Prophet a run for its money with flexibility and fun factor.
The Prophets sound sick and is obviously a beautiful synth to own, but in my opinion it depends how much Prophet sound you want in your productions or have excess money to waste on hardware. For me personally the Prophet would be great Techno, Ambient, Chill or old school John Carpenter style stuff.Im not sure what the "BSP" is, but another option for you could be the Erica Synths Pico range, which is another little modular system.
(1) DNQAAOSw44BYV~k0" target="_blank">http://www.ebay.com.au/itm/Erica-Synths-Pico-Eurorack-Case-Power-Supply-42hp-/162326609458?hash=item25cb6b7e32DNQAAOSw44BYV~k0
(2) WOMAAOSwZQRYZxvV" target="_blank">http://www.ebay.com.au/itm/Erica-Synths-Pico-VCO-Oscillator-EURORACK-NEW-PERFECT-CIRCUIT-/302182229411?hash=item465b76e5a3WOMAAOSwZQRYZxvVOn the more expensive side of things, there are some similar options available such as:
(1) Roland System 500
(2) Pittsburgh Modular Lifeforms System-201
(3) Sound Machines Modulor 114You just have to spend enough time browsing companies products to know whats out there.
Some recommendations for Cases would be:
(1) Doepfer A-100P6
(2) Doepfer A-100LC9
(3) Doepfer A-100LC3
(4) TipTop Audio Mantis
(5) Any kinds of 3U Skiff Case combined with a TipTop Audio uZeus PSU and power brick.
Heres a example of Skiff case that comes with a PSU:
(a) http://www.ebay.com.au/itm/302018843188?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
(b) http://www.ebay.com/itm/Synthrotek-Cheeks-Power-6U-104HP-Case-V1-EURORACK-NEW-PERFECT-CIRCUIT-/121962215659?hash=item1c6583b8eb(6) Synthrotek also offer alot of cool stuff in regards to cases and psu's:
(a) http://www.ebay.com/itm/Synthrotek-Cheeks-Steel-6U-84hp-Case-EURORACK-NEW-PERFECT-CIRCUIT-/302126540028?hash=item46582524fc
(b) http://www.ebay.com/itm/Synthrotek-Cheeks-Steel-9U-84hp-Case-EURORACK-NEW-PERFECT-CIRCUIT-/302126540343?hash=item4658252637(7) Something from SynthRacks.com
(8) Go down the custom case route by either buying side panels or making them yourself:
(a) http://www.ebay.com/itm/Erica-Synths-WOOD-SIDES-1x-6U-THICK-Case-EURORACK-NEW-PERFECT-CIRCUIT-/301730320410?hash=item464087501a
Buy the rails, screws, threads or sliding nuts and PSU aswell. But you need to consider to time of labour and what kind of tools you will need. Going down the pure custom case route isn't always the best option for people who do not have easy access to tools etc. Plus you would only end up saving about $200 - $300 compared to some of the options above, which is basically 1 new eurorack module, is all that effort really worth it to you ?Hope this has helped
Goodluck
-- spaceV2
Hey thanks again for the response! I will check out the options for sure!
BSP = beatstep pro btw, its a hardware sequencer, which saves me some money on the sequencer modules and allows me to use my mfb tanzbar and korg minilogue from easy from one tool.. And hopefully, in the future, a modular synth.
I'm pretty happy about finding the 0-Coast, good chance I'm gonna get that first, but thanks so much for all the ideas, I really need to browse a lot before making decisions it seems, it's all so abundant, there's tonnes and tonnes of options and I really have no clue what's good or bad.
I agree that the prophet is probably not worth its investment, although I do make electronica/techno, so it would come in great for pads. On the other hand, honestly many soft synths make for great pads these days..............
I'm definitely down to make building a rack a summer thing, spending some time on screwing around with screws and rails and drilling holes and stuff like that.. Gotta work for your money right ;) But I'm not suuuper techy, so I'll only go down that road if I'm sure it's not too hard.
Cheers,
Q / Precursor
I agree on what you say. If you want to get rid of your 6U case, going for a 9U one anytime in the summer I'd be up for taking it from you, so you can go bigger and I can start haha.. Anyway I don't have a big budget at the moment, so I can't start now anyway.
What I was thinking is getting the MakeNoise 0-Coast semi-modular synthesizer, once I saved a little. Then At least I'll have a soundsource. I already own a BeatStep Pro, which allows me to sequence hardware (incl. cv/gate). I think it will be a logical approach to start with the 0-Coast and the BSP, so that I can get into the idea of modular synthesis a little bit and then start to buy a 6U case (maybe 104HP) and some basic modules.
It will be nice that I'll already have a sound source then and some sort of adsr control and parameter controls. Maybe once I understand the fx modules a bit, by then I'll have a better idea of what kind of modular VCO/VCA I'd want to get....
I think I'd want Math and Clouds, so it will cost a lot from the start. I can get a job in September that'll make me about 1.6k which I could completely invest into the rack and start everything up. I guess until then I will play around with the 0-Coast.
In any case it's good to see that there are options for the case. Because if you look at my budget it will probably not exceed 2k anytime soon and spending 500-1000 euro's on a case seems kinda ... pointless. I could also get a prophet desktop for like 1.4k I think it was, so that would make a lot more sense otherwise. But if I can find a 300 euro case I'd definitely be up to start about with modular synthesis :)
Thanks for all the replies guys!
Cheers,
Q / Precursor
Thanks for the great help everyone. I was almost giving up on this whole idea after reading about DIY cases that cost between 400-500 euro's... And then the 'custom' ones ranging from 1-1.5k .... That's nowhere near my budget. I'm thinking of postponing my ideas to the summer when I'll have some more time to build it myself, but the synth racks looked quite affordable. Perhaps I'll start with one of those.
If anyone has other alternatives or ideas (or selling a 2nd hand case w/ power supply lol) I'm still all ears as I'm trying to navigate myself a little bit before spending hundreds of euro's :)
Cheers,
Precursor
Hi guys,
I'm currently exploring the idea of this amazing thing called eurorack, but I just found out that the cases are like 10 times more expensive than the modules........ Am I missing something here or what?
I would like to build a synth overtime that I can use on the stage (electronica/techno), and I was thinking about a 12U case, but prices are over 1k euro's so I quickly decided there is no way I can afford that ON TOP of the modules themselves.. 6U has crazy prices too, so I guess I might be looking in the wrong places.
I am definitely considering getting everything 2nd hand, but I know that modular stuff usually doesn't drop in price too much, so really what I'm asking here is, are there any affordable (preferrably portable) cases for sale out there or does everyone in fact build their own? (I'm not very good when it comes to electrical shit...)
Probably this has been asked 1million times before and I have skipped through some pages on the forum trying to find it, but forgive me for not finding my answer. I'm also new to this forum.
Thanks in advance and best wishes for 2017 everyone ;)
Precursor
