Post

That's not going to work with a uZeus even with the bigger power supply - max -ve rail is 500mA - which means you want to keep below 400mA (preferably less) - otherwise expect power problems

I'd try to change to a power supply that has at least 750mA available on the -ve rail & preferably one without the rack wart

I'd recommend the tiptop studio bus - but you'll need 2 busboards otherwise you probably won't have enough power on the +12v - and you still get a rack wart

I like the befaco excalibus - you'd need 2 though, but no rack wart! - so 4hp more to play with! just a hole in the case to take the power cable(s)

otherwise if it were me I'd probably swap the dipole for a blades - or something smaller like a wmd overseer and the pico dsp for a fx aid (get the xl if you can - better ergonomics and more modulation inputs)