as for sending the reset signal to multiple modules, a passive mult (or stackcables, or headphone splitters) should work perfectly, it's a bit of a waste using the buffered mult from links - better for pitch (and potentially if you are re-patching triggers on the fly)
thanks for this info...separately I have an Intelijel buffered mult (no passive mults in my setup) so i will just use that for any gate to Varigate 4+ and Bloom...but also need to get one sent to my separate 3-tier Moog setup...does the signal for a gate diminish in strength if you 'mult' it out too much?
I don't think so, most trigger/gate outputs are between 5V and 8V. It depends per module what the input threshold voltage is for a gate, from a quick Google search I found that some modules respond to a gate input of 1.4V.
Buffered mults are more stable in voltage, this is mostly used for sending pitch information. For triggers/gates, mult however you want them.