Offer Details

This pedal features lovely fuzz circuit and MS-20 style filter to dial in the perfect fuzz tone. Also controllable via expression pedal- Silver UFO saucer style knobs on white chassis- 2 x Cable Matters Braided Jacks- Collision Devices Guitar Pick- Collision Devices Sitcker- Collision Devices Voucher Card- Pristine, barely-used ex-demo stockGain : Placed after the Jfet transistor input stage and followed by silicon gain and clipping stages. Master : Master volume. CutOff : This fader controls the cutoff frequency of the MS-20 style low pass filter. Based on a LM13700 stage. Goes from 15Hz to 44kHz. Resonance : Increases the intensity of the signal around the cutoff frequency.LPF VOL : VCA - sets the output volume of the filter. Pretty useful to adjust the filter to your setup.2p/4p toggle switch : Select the attenuation curve. Cut at -12dB/octave (2p) or at -24dB/octave (4p). Add Fuzz (On/Off) toggle switch : Add an extra unfiltered fuzz signal. The result is louder and creates cool frequencies boost or cut depending on the cutoff position.S / P toggle switch : Put the fuzz through the filter in serial - or use both effects in //. Expression/CV : The Expression/CV control is linked to the cutoff fader. The cutoff fader value sets the lowest value the EXP pedal can go. TARS is a fuzz/analog filter pedal. It means "This Audio Reached Singularity".It’s a robot looking for life in space too. But that’s a long story we’ll tell you in the user manual. TARS’ fuzz part comes from the Black Hole Symmetry "Singularity" section. Put it through the analog "MS-20 style" filter to create fuzzy-noisy textures. Cut through the mix with the different filter and EQ possibilites or sweep between the frequencies to create huge waves of noise.