Offer Details

Bass Driver ProgrammableAlways thinking of our fatstringed brethren we had to make a 3channel programmable riginabox for bassists who cant get enough of a great thing. Like the TRIAC for guitar, you get three hot tones right at your toetips. The allanalog circuitry features the same controls as its single channel predecessor Drive, Bass, Treble, Presence, Blend and Level. Digital only in its programmability, you just tweak the knobs until you find a tone, doubletapon a footswitch, and its saved in that channel. Its that simple. Three of your faves to goAdditional FeaturesBuild your Bass Driver DI into a live rig with a Bass Power Engine 60, and run through the PA for extra power.Boldly go live with just your Bass Driver DI straight into the PA.Bounce into any studio with a Programmable Bass Driver DI and plug directly into the board.BUILTIN SPEAKER/CAB SIM The 100 analog SansAmp Tube Amplifier Emulation technology encompasses the entire signal chain, from preamp to power amp to speaker simulation. An integral part of the circuitry, the SansAmp speaker simulation will complement any type of guitar or bass speaker cabinet system. You can also place an external IR after a SansAmp to give additional flavor if you so desire. The SansAmp speaker sim is designed and individually tailored for a smooth, even response as would be achieved by a multiplymiked cabinet without peaks, valleys, and notches associated with single miking and many IRs.While larger than our other SansAmp pedals, the Programmable Bass Driver DI still fits into a gig bag. Actual size 7.25L x 5.25W x 2.25H.Even with its roadworthy allmetal construction, each unit weighs in at a mere 25 oz.Operable via phantom power.Operable with 9V alkaline battery not included.Optional DC power supply is available Tech 21 model DC9. Click HERE. (Also operable with former models DC2 and DC4).