ModularGrid uses so-called cookies to ensure it's so-called functionality. We also use dubious tracking scripts. Find out more in the Privacy Policy. We use cookies and wanna let you know.
Got it.
Stereo Tremolo / Auto-Panner
https://www.fulltone.com/products/supa-trem2
Go to the Module Detail PageIf you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
Fulltone Supa-Trem ST-1Fulltone Supa-Trem Model ST-1, the finest amp-style Tremolo pedal you can buy since 1996, just got a whole lot better! For years people have been turning the ST-1’s MIX knob down all the way, opening the pedal, and turning up its internal volume control to maximum, and using the Supa-Trem as a very subtle clean boost. Now I’ve put a low-profile VOLUME knob on the outside of the pedal, and increased its available gain to around 15dB...allowing the ST-1 to pull double duty as a stellar clean boost. One reason the Supa-Trem sounds so good is that it uses a wonderful LF351 JFET at the heart of its circuit, giving you a warm yet clear tone when your pedal is turned on. The ST-1 also employs a custom-designed Fulltone Opto-1 photocell with an extremely fast recovery time which no other manufacturer can match. This makes it behave just like an old 1960’s American tube-amp, but without the annoying ticking sounds that plague amps and other tremolo pedals. The Supa-Trem is the most versatile tremolo on the market, sporting True-Bypass with Green ON/OFF L.E.D. and a Red RATE L.E.D. showing your speed at all times (even when pedal is OFF) so you can drop right into the song at the correct tempo. With the ST-1’s large RATE and MIX knobs you can fine-tune on-the-fly with your foot. The SPEED footswitch correctly halves or doubles your tempo so you stay rhythmically-correct with the tempo of the song you’re playing! Finally, there’s a HARD/SOFT footswitch for choosing between SOFT MODE (a rollicking sine-wave) or HARD MODE, which is more of a square-wave machine-gun stutter. There's an internal trimmer to fine-tune the current reaching the Photocell to change feel of the waveform, although we recommend leaving it where we set it so you have the ability to turn down the MIX control and not hear any tremolo when using as a clean boost. If you like organic Tremolo tones there’s nothing that approaches the Fulltone Supa-Trem ST-1, may it serve you for years and become a part of your sound. That would make me extremely happy. Regards, Michael Fuller / PresidentST-1 Features:BYPASS footswitch: The Fulltone-made 3PDT footswitch is the toughest switch you can get. The Supa-Trem is turned ON when the green L.E.D. (light emitting diode) is lit up.
VOLUME mini-knob: This small knob only works when pedal is turned ON. When this knob is turned Full Counter Clockwise (CCW) you should be at "unity gain," meaning your level should be about the same as when the pedal is turned OFF, depending on settings.
RATE knob: This large knob controls the speed of the effect when pedal is ON. You may use either your fingers or your feet to adjust this knob, making changes during a song a breeze!
RATE L.E.D. : This red L.E.D. always flashes in sync with the RATE setting, even when the pedal is turned off! This allows you to pre-set the desired tempo before you turn the pedal on, making it easy to drop in on a song without sounding out of sync with the song's rhythm.
SPEED footswitch: Stepping on this will get you either half or double whatever your current speed (RATE) is. It's a great way to add drama without getting out of sync with the song's tempo ... sort of what an organ player does with his leslie spinning speaker cabinet.
MIX knob: This large knob makes the tremolo effect stronger as it is turned CW, and more subtle as it is turned CCW. You may also use your foot to adjust this knob.
HARD/SOFT footswitch: Allows you to go from normal tremolo to super-choppy square-wave tremolo on the fly. Cool Trick! Turn MIX full CCW, make sure the HARD/SOFT switch is set to SOFT, and your pedal becomes an amazing Clean Boost device when you turn it on ... simply set the VOLUME knob to how ever much kick you want. NOW, if you want to add tremolo, simply step on the HARD/SOFT footswitch and you'll have a normal sounding sine-wave tremolo.
DC Power Options: You may ONLY run this pedal on the 9 volt battery (included) or on any 9Volt DC power supply as it's a standard 2.1 mm x 5.5mm barrel plug with "Negative to Center Pin" configuration. To access the battery remove the four screws holding the rubber feet and pull the housing apart. Replace battery, put housing back together and re-install rubber feet and four screws. Unplug the guitar cable from INPUT when not in use to prolong battery life but if you have an adapter plugged in to the DC outlet there is no need to unplug the guitar cable from the INPUT because our DC outlet is True-Bypass and disconnects the battery supply line, thus keeping the battery fresh.
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.
Look up onDisclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.