ModularGrid uses so-called cookies to ensure it's so-called functionality. We also use dubious tracking scripts. Find out more in the Privacy Policy. We use cookies and wanna let you know.
Got it.
If you had an Unicorn Account you could see a chart with the price development of this module and the average price asked for this module.
The first thing you’ll notice when you step on the PAC-9 is a beefy, full-bodied chorusing that punches you directly in the chest – gone are the thin, hissy, sissified chorus tones of yesteryear, replaced instead by a full-frequency effect that simply sounds massive.The PAC-9’s circuit uses professional-grade IC’s typically reserved for High-End Audio applications, providing audiophile performance in a compact stompbox format.When compared to a standard chorus, the PAC-9’s effect appears more dramatic and has more presence in a mix – this is due to the retention of low and low-mid frequencies that are typically chopped out by other boxes.The PAC-9’s LFO has an extended range that allows it to nail classic rotary speaker sounds with ease. In addition to standard Speed and Width controls, The PAC-9 also features two unique controls: The Pure switch boosts the delayed signal by 4 dB to create a more dramatic, tremolo-like chorus effect, while the Bright switch subtly scoops lows on the delayed signal for a more traditional chorusing sound.Standard and inverted (90 degrees out of phase) outputs allow for mono, stereo, or inverted mono signal routing options.The PAC-9’s internal voltage-doubling circuitry provides maximum headroom to eliminate input distortion. The higher operating voltage also allows it to be used in an FX loop to place the chorus effect post-gain. TECH TALK NOTE ON POWERING THE PAC-9 - this pedal’s voltage regulator IC requires a high inrush current of approximately 2000 mA upon startup. When using with a Power Brick such as the Voodoo Labs Pedal Power 2+, this pedal should be connected to a high current power jack when possible.If it is not possible to connect to a high current jack, you can power the PAC-9 by leaving a battery in the pedal. Upon initial start-up, unplug the external DC power input cable, engage the pedal, and then plug the DC power input cable back in – the pedal will now power up normally off the external power supply until you power down your pedalboard. Features Analog chorus with lush, organic toneWide-range Speed control for Rotary speaker effectsSpecial noise filtering circuitBright and Pure switches for additional tonal optionsStereo outputsWorks in FX loop or front-end of ampTrue Bypass Switching Specifications Input Impedance: 500K OhmsOutput Impedance: 10K Ohms or lessMaximum Output Level: +9 dB (400 Hz)Delay Time: 4.6 msec – 7.68 msecSpeed Frequency: .33 Hz – 8 HzControls: SPEED, WIDTHSwitch: BYPASS/EFFECT (mechanical TBS)PURE, BRIGHTIn/Out: INPUT, OUTPUT, INVERSE OUTPUTResidual Noise: -95 dB (IHF-A)Indicator: BYPASS/EFFECT LEDInternal Circuit Voltage: 9 VDC (DC-DC Converter)Current Consumption: 21 mA / 9 VDCPower Supply: 6F22 9V battery or Maxon AC AdaptorBattery Life: Manganese battery 8.5 hours @ 25deg C, Alkaline battery 20 hours @ 25deg CDimensions: 74 mm (W) x 124 mm (D) x 54 mm (H) / 2.9” (W) x 4.9” (D) x 2.13” (H)Weight: 580 g (including battery) / 20.46 oz.
This offer was fetched from reverb.com. You cannot contact the seller via ModularGrid. You have to visit their site.
Look up onDisclaimer: Modules listed for sale on the ModularGrid Marketplace are offered explicitly by their respective owners. ModularGrid is not affiliated to the sellers and takes no legal responsibility in any transaction.
The internet is a rough place and fraudulent behavior can occur. If you are concerned about dealing with strangers consider buying your module at an authorized dealer.
