SWT16 (808Version)

16x64 Step Trigger Sequencer w/ Wav Trigger backpack

Robaux SWT16
The Robaux SWT16 is a 16-track trigger sequencer with up to 64 steps per track.

Programmable like a classic TR machine, the SWT16 can be used not only for triggering drum sounds, but also for Envelopes, S'n'Hs or resetting LFOs.

The SWT16 is polymetric - each track can have a different length, from 1 to 64 steps. Even more complex rhythms succeed with the individual clock divider per track.

The SWT16 has an intuitive user interface. All operation is via the illuminated 4x4 keypad. From the main screen, you can access the 16 different modes of the sequencer. The buttons adapt to the selected mode. With the back button, you can quickly return to the main screen.

Each track has its own trigger output. In addition, the triggers are also sent via MIDI notes (requires an adapter).

There is also a backpack attached to the rear. Wave Trigger Board. This connects the first 14 trigger outs directly to the trigger ins on the wav trigger. The WT triggers 15&16 are reserved for bank switching up and down. This also connects to a 2hp expansion that provides a momentary toggle up and down for bank switching, a micro sd card extension (so you don't have to remove the module), and two outputs. The wav trigger is a stereo output board. You can fake mono by setting up your sample banks by prepping your samples to be stereo but are either hard panned left or right. A good rule would be to separate by freq. (ie kicks, toms etc on left and cymbals hh metalic etc on the right)