Dimensions
8 HP
30 mm deep
Current Draw
33 mA +12V
33 mA -12V
0 mA 5V
Price
$200 Price in €

Available as an assembled Module and as a DIY project.

This Module is currently available.

Dual chaos driven S&H with VC slew

This module is a dual sample & hold with voltage controlled slew for each channel. It contains a simple jerk chaos circuit running at approx. 300Hz to supply a signal for sampling. So, it is similar to the Buchla 265 Source of Uncertainty except it uses chaos as a source rather than white noise and a 100Hz oscillator, plus a lot less components, no weird power supply voltages……and there are two of them in 8HP. To get it running, patch a signal into the clock input. Clock 2 is normalled to Clock 1 so a signal on 1 will drive both channels.

The block diagram for one channel is shown below. The Stepped Out only samples from the chaos circuit, whereas the S&H Out and Smooth Out are sampled from whatever signal is patched to the Sample In (or chaos if nothing is patched in). The chaos signals are taken from different sections of the chaos circuit so if just driving the module with a single clock signal you can get 6 different chaos signals out of it, assuming you turn up the Slew pot a bit.

https://www.nonlinearcircuits.com/modules/p/helvetica-scenario


Ø 5.00 (2 Votes) Average Rating
submitted Oct 23rd 2020, 00:31 by AndrewF | last Change May 12th 2022, 05:35 by sibilant

11 Users are observing this

Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

Australia

Found Sound

USA

Synthcube

These merchants probably sell this module. Huh?