Dimensions
26 HP
58 mm deep
Current Draw
27 mA +12V
26 mA -12V
0 mA 5V
Price
$273 Price in €

Available as an assembled Module and as a DIY project.

This Module is currently available.

CGS733 - 4x4 Matrix Mixer

Matrix Mixer

The CGS733 is a four input, multiple output bipolar or unipolar DC coupled mixer, for mixing control voltages. In cases where you require several different mixes from a common set of signals, this module is ideal.

Each output can be independently switched to operate in unipolar or bipolar mode.

When in unipolar mode, all pots feeding that output behave in regular fashion, that is when the knob is fully counter-clockwise, no signal from the associated input passes into the mix. As the knob is advanced clockwise, a greater portion of the signal passes into the mix.

In bipolar mode, each knob has a zero position mid-way through it's travel. Turning the knob anti-clockwise will add an increasing portion of a negative (inverted) version of the signal at the corresponding input, while turning the knob clockwise will add an increasing portion of the original signal to the mix.

The CGS733 can be used as an Audio Mixer although any DC offset in the IN signals will be present on the outputs .

www.elby-designs.com/webtek/panther/panther.htm


Ø 1.00 (1 Votes) Average Rating
submitted Jan 10th 2016, 11:14 by WidgetOz | last Change Feb 14th 2018, 00:44 by Lugia

3 Users are observing this

Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

USA

SynthcubeNoisebugPerfect Circuit

Canada

Lower West Side Studio

These merchants probably sell this module. Huh?