Dimensions
8 HP
65 mm deep
Current Draw
? mA +12V
? mA -12V
? mA 5V
Price
$192 Price in €

Available as an assembled Module and as a DIY project.

This Module is currently available.

ES12 - Triple Bi-Directional Router

Three-section Bi-Directional Switch

The ES12 contains 3x voltage controlled routers that can route one input to either of two outputs, or either of two inputs to one output according to the voltage level at the 'control' input.

The CONTROL switch point is, nominally, around 2.5V. When the CONTROL is low the signal path is A1 B and when CONTROL is high the signal path is A2 B

The switches are true bidirectional switches. You can feed signals through them in either direction. Note that due to the limits of CMOS, it can switch signals that are up to about +/-9 volts.

https://www.elby-designs.com/webtek/euro-serge/es12-triple-bidirectional-router/es12.htm


submitted Jan 10th 2016, 06:52 by WidgetOz | last Change Dec 26th 2022, 14:29 by pugix
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

USA

SynthcubeNoisebugPerfect Circuit

Canada

Lower West Side Studio

These merchants probably sell this module. Huh?