Dimensions
4 HP
13 mm deep
Current Draw
7 mA +12V
6 mA -12V
0 mA 5V
Price
$87 Price in €

No info about availability.

Specs are approved by the manufacturer

Splices together different halfwaves of two signals

The splicer module allows you to combine the positive and negative amounts of two independent signals.
The positive input processes only the positive halfwave, or signals above 0V. Negative signals will be cut.
The negative input works equally but processes only the negative halfwave, respectively signals below 0V.
For example the module can be used to splice different waveforms from a VCO together, resulting in a new timbres not often heard. Nice effects can also be achieved if the input signals not only differ in form but also in frequency and/or phase, which results in constantly shifting timbres.
The circuit is completely DC coupled thus can also process CV or very low frequency signals.
The “spliced” signal is also available inverted on a second output jack.

As usual: there is a pinheader on the PCB for picking up I/O signals for internal prepatching of the module.

Inputs:
Positive Input (everything above 0V)
Negative input (everything below 0V)

Outputs:
Splice Out
Inverted Splice Out

http://seismic.industries/splicer/


submitted Dec 1st 2015, 07:36 by seismic_industries | last Change Feb 24th 2016, 19:17 by seismic_industries

2 Users are observing this

Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

USA

SynthcubeNoisebug

These merchants probably sell this module. Huh?