Korg NTS-1 MKII Eurorack Conversion Kit

Description:

Introducing the ISOGRID NTS-1 MKII Eurorack Conversion Faceplate Kit - built to make the NTS-1 MKII feel like it was always meant to live in a rack. Clean layout. Proper integration. No hacks. Just a finished, rack-ready front panel that turns the NTS-1 MKII into something you actually want to patch.

Features:

Converts Korg Nu:Tekt NTS-1 Digital Synthesizer MKII to standard 3U Eurorack Format
Direct bolt-on kit
Plug & Play TRS cables - no soldering required
Buffered multiple (1 input, 3 identical outputs)
Dedicated L / R mono inputs and outputs (stereo split to L and R)
Summed mono on L (patch L only for summed mono - applies to both input and output)
Output level matched for Eurorack systems with master VOLUME control
Access to SYNC IN / OUT and MIDI IN / OUT (TRS Type A) from the faceplate
Front-panel USB-C DATA port for firmware updates, patch management, and Korg Librarian
Custom power conversion and noise isolation from your rack bus board
Includes:

(1) Faceplate assembly

(1) Power activator tab

(1) 90-degree USB-C to USB-C cable

(6) 90-degree 3.5mm TRS cables

(1) 10-16 pin IDC power cable

(4) M3 rack mounting screws

Installation PDF and Video Guide Available

Dimensions:

Requires +12V 250mA
Height: 128.5mm
Width: 132.08mm
Depth: 47mm
Knowledge Base (Pre-Buy FAQs):

POWER: Requires Eurorack power via IDC cable (included). Always power off your rack before connecting. Incorrect cable orientation can damage the kit, the NTS-1 MKII, and other modules.
MIDI: Uses TRS MIDI Type A. A Type A to 5-pin adapter is not included but widely available.
INPUT LEVELS: Eurorack signals can be hot. You may need to lower input gain in Korg Librarian (Global tab) to avoid clipping, -24dB recommended.
FIRMWARE / LIBRARIAN: Yes - firmware updates and Korg Librarian work from the front DATA port while fully racked.
COMPATIBILITY:

Designed exclusively for the NTS-1 MKII. Not compatible with the original NTS-1.

Korg NTS-1 MKII Not Included.

TRS Type A to 5-pin DIN MIDI adapter is not included.

Case / Additional Modules Not Included.

Sold as-is - No Returns

These faceplates undergo production in a PCB factory before being assembled by hand in Los Angeles, CA and Asheville, NC. We prioritize the highest quality control measures for each product. However, it's important to acknowledge that minor blemishes or imperfections may arise on the faceplates as an inherent outcome of the manufacturing process.

DISCLAIMER:

By purchasing and using this conversion kit, you agree that the manufacturer and associated parties are not liable for any damages or malfunctions that may occur during installation or usage. It is your responsibility to follow instructions carefully and ensure compatibility. Unforeseen circumstances or user error may lead to unintended consequences. Seek professional assistance if needed. By proceeding with the purchase, you release the manufacturer from any liability. Your satisfaction and safety are important to us, and we believe our conversion kit will enhance your NTS-1 MKII experience when used correctly.

https://reverb.com/item/98381391-nts-1-mkii-eurorack-conversion-faceplate-kit-for-korg-nu-tekt-digital-synthesizer