Dimensions
16 HP
30 mm deep
Current Draw
30 mA +12V
30 mA -12V
0 mA 5V
Price
$115 Price in €

Available as an assembled Module and as a DIY project.

This Module is currently available.

AM8133 is DC coupled which means it can be used to process CV signals and audio signals.

OVERVIEW:
When Roland developed the System 100M they created a Dual VCA module (130), with an AC coupled signal path. Unfortunately any replicas of the 130 module in Eurorack cannot be used for adjusting the level of CV signals, so we have created a dual VCA that is DC coupled and can be used with both audio and control voltages.

DESCRIPTION:
The AM8133 has two DC coupled VCA's based on the AS3360 chip. There are two 30mm CV input level slider pots for each VCA and a rotary pot for GAIN. The sliders have subtle green LED's and the rotary pots have Roland TR808 style knobs.

There are jack sockets for the CV inputs at the top of the panel, and input and output sockets at the base. This makes for easy patching into a Eurorack system whilst maintaining visibility of the controls. There are two green LEDs that indicates the level of the output signals.

There are no capacitors in the signal path, and high quality Op Amps have been used to ensure minimal DC offset, so that the VCA's can be used with pitch signals. A grey powder coated panel, with white silk screen, has been custom manufactured for the module.

CONNECTIONS:
There are eight jack sockets, each VCA has these connections:
* CV1 Input
* CV2 Input
* Signal Input
* Signal Ouput

The module comes with a set of M3 mounting screws and washers, and a standard Doepfer power cable.

https://www.amsynthstore.co.uk/product/am8133-dual-dc-vca


submitted Mar 7th, 04:13 by gilburns | last Change May 31st, 22:14 by pugix
Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

USA

SynthcubeThree Wave Music

These merchants probably sell this module. Huh?