Dimensions
4 HP
42 mm deep
Current Draw
20 mA +12V
0 mA -12V
0 mA 5V
Price

Available as an assembled Module and as a DIY project.

This Module is currently available.

Arduino Clock Divider/Gate Utility module

The ClockDivider is a generic clock/gate utility, with 1 digital input and 8 digital outputs.

The main purpose is to divide the incoming clock pulse and to output the various clock pulses according to the uploaded Arduino sketch.

Example division ratio can be 1/2, 1/4, 1/8, 1/3, 1/6, 1/12, 1/24 and 1/5.

This divider is "musically accurate": On first beat, all the outputs are ON

The two small tactile switches allow for manual trigger/gate.

It's also possible to modify the Arduino code and use this module as a generic 1 digital input/8 digital outputs device.

Example, the module can be turned into a sequence/beat/pattern generator, Gate to Trig converter, delay, serial to parallel conversion, or a more simpler ring counter, K2000 thing or whatever... Feel free to experiment.

Arduino (open) source code is available on Github: https://github.com/dhaillant/uc_divider

https://www.davidhaillant.com/uc-clock-divider/


Ø 5.00 (1 Votes) Average Rating
submitted Jan 31st 2022, 11:35 by dhaillant | last Change Jul 27th, 17:11 by playback

1 Users are observing this