Dimensions
4 HP
13 mm deep
Current Draw
? mA +12V
? mA -12V
? mA 5V
Price
$99 Price in €

Available as an assembled Module and as a DIY project.

This Module is currently available.

Specs are approved by the manufacturer

IPS – Interruptible Power Supply

Interruptible Power Supply

IPS is a 4HP eurorack diy kit. It’s a switched-mode power supply that converts the 5V power from any USB interface/charger into +12V/-12V for your modular synthesizer. This does not allow you to power big racks but can easily power up a fully equipped 42HP case. Although the design of the IPS mainboard is modular/stackable to deliver more power. The kit includes whashers to stack the boards together to get more output power. You can also use the unit without frontpanel inside a case (no access to the SHUT inputs) if it has a power switch and a 5V input.

Positive and negative rails are independently built, and the circuits have shutdown inputs which are accessible thru two jacks on the frontpanel.
This gives you a very different approach to operate a connected module. By “proper” modulation of it’s own powersupply voltages any connected module(s) can operate then in a, let’s say: “near death state”, which can create interesting effects.

The kit also includes the babybusboard, which is a small busboard (7 outs) to distribute power to your moduels.
A 20cm cable and connectors come also with.

In a glimpse:
* modern and fast 1.2-2MHz switching regulators from LT deliver up to 300mA@12V and 150mA@-12V
* includes the babybusboard with 7 output connectors (flatmount, can directly be mounted on a surface)
* IPS mainboard can be mounted inside a case without frontpanel like a common PSU (flatmount too)
* stackable for more output power
* 32 parts to solder

I/O:
* SHUT +12V deactivates the swiching regulator for the positive rail
* SHUT -12V deactivates the switching regulator for the negative rail
* internal 10 pin molex header that connects to the babybusboard via ribbon cable

Power Output:
* +12V 300mA / -12V 150mA (if incoming USB interface delivers it)

http://seismic.industries/product/ips_diy_kit/


submitted Dec 20th 2016, 13:21 by seismic_industries | last Change Oct 29th 2018, 19:02 by seismic_industries

2 Users are observing this

Affiliate Disclosure
This page contains affiliate links from eBay, Reverb.com and other partners for which ModularGrid may be compensated.

USA

NoisebugSynthcube

These merchants probably sell this module. Huh?