S-411 Shaper

S-411 Shaper module for eurorack / Doepfer A100 system.

Compares input voltage (or ctrl input voltage, normalled to input if ctrl jack is not plugged-in) with adjustable thresholds (positive and negative). While input signal (or ctrl input) exceeds positive (or is below than negative) threshold then output is switched to DC level set by level knob (0-5V) or to external signal (then level knob serves as attenuator for external signal if ext in jack is plugged). Basially waveshaper with modulation capabilities. S-410 is DC coupled, low offset main signal path so it can be used for processing tuning CVs too.

Internal jumper allows to select switch mode (signal is switched to ext/DC, jumper header removed) or mix mode (input signal is mixed with ext/DC, jumper header set).

This module is a successor of S-410 Shaper which has been discontinued.

http://ladik.ladik.eu/?page_id=2979