SxS

Digital Controlled Analog Sequencer

SxS is a 6-step digital controlled analog sequencer.
The CV output path is fully analog and step switching is digitally controlled.

The output CV and the trigger output ON/OFF can be set for each step, and the running direction of the step can be changed to reverse/stop/forward using a 3-point toggle switch.

You can also enter Active Step mode by tapping the MODE button.
(The ACT LED lights red)

In Active Step mode, each step can be enabled/disabled, and disabled steps will be skipped during step progression.
Tap the MODE button again to return to Trig mode.

Furthermore, by holding down the MODE button and pressing the step button, you can divide the steps into A/B groups.

The position of the pressed STEP button becomes the end position of group A, and the next step becomes the start position of group B.
(To cancel group division, hold down the MODE button and press the 6th STEP button)

The steps in group A progress each time a clock is input, and the steps in group B progress one step each time the steps in group A complete one cycle.
If you divide the steps into groups, the output value of CV will be half of the sum of the values ​​of group A and group B:

・When there is no group division

CV Out = Group A CV

・When dividing into groups

CV Out = (Group A CV + Group B CV) / 2

By group division, 6 steps can be divided into 2x4, 3x3, etc., making it possible to use it as a pseudo 8-step or 9-step sequencer.

In addition, it is possible to use different group division methods and change the sequence running mode.

https://centrevillage.net/products/24